Thank you for purchase M28.
M28 does not drive by itself. However we have bundled a developer kit so that everyone who purchased can make themselves additional functions, and sell, distribute and introduce easily.
Do you want to light the headlight? Do you want to play the engine sound? You can do them yourself with the developer kit. Don't you want to drive M28? With the developer kit, you can make that wish much easier than developing everything.
All the purchaser of M28 have the right to sell or distribute their work which includes the kit. It's transferable!
developer kit for M28 … object / Mod-Copy-Trans
├ m28drivervasepose.bvh … pose for driver / Copy-Trans
├ m28passengerbasepose.bvh … pose for passenger / Copy-Trans
└ vias10_for_m28.lsl … script for developing / Copy-Trans
vias10_for_m28.lsl is not actively processing. It is designed to perform specific processing by receiving link messages. Hereinafter, we express vias10_for_m28.lsl as VIAS1).
AnalogMatic for M28 is our development in order to show you how VIAS works. After you install it, you can take your friend out with M28. We added 2 scripts and associate them with VIAS.
AnalogMatic for M28 … object
├ am-eg_for_m28.lsl … physical parameters
├ am-io_for_m28.lsl … interface and communications with VIAS
├ m28drivervasepose.bvh … pose for driver
├ m28passengerbasepose.bvh … pose for passenger
└ vias10_for_m28.lsl … VIAS
See this page and install it.
Please tell me when you release your development. We introduce your works here.
Make link both developer kit and M28 by the same procedure as AnalogMatic. After that, add scripts, animation, sound, etc and send link message from the script according to the following API to control M28.
VIAS is the basic script that controls the car state. From now on, all our vehicles will be equipped with VIAS and will be able to control the cars with the same API system.
VIAS can
By separating interfaces and physical engines and standardizing the specifications of car control scripts, the following advantages are generated for third-party developers.
Further, as the number of developers who adopt this mechanism increases, the following advantages are created for users.
All transmission / reception is done with link message.
integer ApiVersion; SendAPICommand(string command, integer value){ // transmission llMessageLinked(LINK_ROOT, value, command, ""); } default{ state_entry(){ SendAPICommand("VERSION", 0); } link_message(integer sender, integer value, string response, key id){ // reception if (response == "VIAS-M28"){ ApiVersion = value; } else if (llGetSubString(response, 0, 3) == "VIAS"){ llSay(0, "[ERROR] does not correspond to this model"); } } }
API ver. | command | value | 説明 |
---|---|---|---|
1.0 | VERSION | — | Query API version. In response to the inquiry, the following reply will be made. response = “VIAS-M28” … To LINK_THIS, assign a value obtained by multiplying value by 10 times and return it. In the case of ver.1.0, value = 10 is returned. |
1.0 | RESET | 0 | Discard variables related to vehicle body control held by VIAS and restore the following initial state. LEFT = 0 SPEED = 0 GEAR = 0 PARKING = 1 |
1 | Reboot VIAS. With this command, VIAS starts the installation work; moves and rotates each link prim to the prescribed position. After reboot, the following reply will be made. response = “SEAT” … To LINK_SET, returns the link number of SEAT. You may use this number as the passenger's sit target. response = “INIT” … To LINK_SET, returns the boolean whether succeed installing or not. |
||
1.0 | ENGINE | 0 | Stop engine sound. |
1 | Play engine sound. | ||
1.0 | TEXT | 0 | Text off. |
1 | Text on. | ||
1.0 | LEFT | -200 〜 200 | Turn handle left and rotate front wheels. ex) LEFT = -127 means turning right 12.7 degrees. |
1.0 | SPEED | -100 〜 100 | Changes “Speed : xx%” on the text and wheels rotate. When SPEED < 0, changes the Gear “R” on the text. VIAS does not have any physical parameters so car would not run with this command. |
1.0 | GEAR | 0 〜 4 | Changes “Gear : n” on the text and move shifter. |
1.0 | PARKING | 0 | Hides “P-Brake : ON” on the text. |
1 | Shows “P-Brake : ON” on the text. | ||
1.0 | LIGHT | 0 | head light = OFF / side lights = OFF |
1 | head light = ON / side lights = OFF | ||
2 | head light = OFF / side lights = ON | ||
3 | head light = ON / side lights = ON | ||
1.0 | BRAKE | 0 | Brake lamps OFF. |
1 | Brake lamps ON. | ||
COVER | 0 | Hides engine cover. | |
1 | Shows engine cover. |
You need not use “anhelo” or “VIAS” in your development name.
If you don't use the poses “m28driverbasepose.bvh” and “m28passengerbasepose.bvh”, please kill them from the inventory.
Customers have to make link between M28 and your development. So you should release it as modifyable.
Customers have to purchase M28 from anhelo when they use your development. So you should add that remarks on your AD. Our main store is here. Please add this LM in your package.
Please tell me about
We will publish about your development through